Hypertherm HPE800XD Primary Power Supply 380 Volts with Hypernet, 078589

Hypertherm HPE800XD Primary Power Supply 380 Volts with Hypernet, 078589

Hypertherm HPE800XD Primary Power Supply 380 Volts with Hypernet, 078589

Regular price $46,718.75
/
  • Please Request availability & Freight quote
  • Secure payments

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

HyPerformance HPR800XD

Designed and built for maximum performance and productivity in mechanized cutting operations, the versatile HyPerformance® HPR800XD® plasma system delivers the ultimate in HyPerformance mild steel cutting, and offers unmatched process flexibility to cut, bevel and mark metals up to 6-1/4″ (160 mm) thick.

Superior cut quality and consistency

  • HyPerformance plasma cuts fine-feature parts with superior quality and consistency
  • HyDefinition® technology aligns and focuses the plasma arc for more powerful precision cutting up to 6-1/4" (160 mm)
  • New HDi™ technology delivers HyDefinition cut quality on thin stainless steel, with extremely sharp top edge quality, shiny surface finish, and superior angularity with reduced angle variation
  • Patented True Hole™ technology (auto gas systems only) produces hole quality that is significantly better than anything previously achievable with plasma
CHT_hpr800xd_cutQ.gif

Minimized operating cost

  • LongLife® technology significantly increases consumable life and enables consistent HyDefinition cut quality
  • Faster cut speeds let you produce more parts per hour; higher quality cutting virtually eliminates the cost of secondary operations
  • Patented PowerPierce® technology lets you pierce  thicker than ever before and replace slower-cutting oxyfuel technology
CHT_HPR400opcost_D_w1inch.gif

“Do anything” versatility

  • Cuts, bevels, and marks carbon steel, stainless steel, aluminum, and other metals with HyDefinition precision
  • Modular system design allows easy power supply upgrades to increase system capabilities when requirements change
CHT_OXYlaserPLASMA_w1inch.gif

Industry-leading reliability

  • Robust, simple system architecture with 50% fewer parts than most competitive systems
  • Best-in-class manufacturing and extensive testing ensure that every Hypertherm system meets the highest quality standards
  • The HPR800XD system is comprised of two HPR400XD systems in parallel. Each power supply has the following specifications.

    General
    Maximum OCV (U0) 360 VDC
    Maximum output current (I2) 400 Amps
    Output voltage (U2) 50 – 200 VDC
    Duty cycle rating (X) 100% @ 80 kw, 40° C (104° F)
    Ambient temperature/Duty cycle Power supplies will operate between -10° C and +40° C (+14° and 104° F)
    Power factor (cosφ) 0.98 @ 400 ADC output
    Cooling Forced air (Class F)
    Insulation Class H

     

    Mild steel cut capacity Dross free
    Production pierce
    Maximum cutting capacity
    38 mm (1-1/2")
    50 mm (2")
    80 mm (3.2")
    Stainless steel cut capacity Production pierce
    Maximum pierce**
    Severance
    75 mm (3")
    100 mm (4")
    160 mm (6-1/4")
    Aluminum cut capacity Production pierce
    Severance
    75 mm (3")
    160 mm (6-1/4")
    Speed
    (Mild steel)
    Book specification at highest output current
    12 mm (1/2")
    4430 mm/m
    (170 ipm)
    Cut angle ISO 9013 range*
    2-5
    Weldability   Ready to weld
    Process gases
    by material
    (Plasma/shield)
    Mild steel


    Stainless steel



    Aluminum

    02/Air, 02/02
    Ar/Air

    H35/N2, N2/N2, H35-N2/N2, F5/N2
    Ar/Air, Ar//N2

    H35/N2, Air/Air, H35-N2/N2
    Ar/Air, Ar//N2

    Process amps
    (Cutting)
    Not all processes available
    for all materials
    30-800

    * ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
    ** Maximum pierce requires use of an autogas console and controlled motion process. See technical documentation for details.

lincoln welders

Request For Availability & Freight Quote

We offer freight shipping for certain pieces of heavy-duty equipment not in stock, such as large welding machines. Reach out to us today for availability and a shipping freight quote to find out how you can get ahold of the machinery you need.

More from Quick Order
Lincoln Electric Viking™ 2x4C Series Auto Darkening Lens KP3775-1
$152.89
Lincoln 3350 Viking™ Black Welding Helmet K3034-4
$319.00
Victor Performer 540/510 EDGE 2.0 Outfit 0384-2125
$409.00
Lincoln Fuel Gauge Assembly Replacement 9SS22934
$177.00
Lincoln Electric Extended Helmet Cover w/Press Fit Silicone Seal KP4789-1
$34.89
Lincoln Electric VIKING™ 3350 ADV Series Black Helmet K3034-5
$365.00
Recently viewed