Lincoln Electric UltraCore® HD-12C Flux-Cored Gas-Shielded (FCAW-G),0.052 in (1.3 mm) | ED038186

Lincoln Electric UltraCore® HD-12C Flux-Cored Gas-Shielded (FCAW-G),0.052 in (1.3 mm) | ED038186

Lincoln Electric UltraCore® HD-12C Flux-Cored Gas-Shielded (FCAW-G),0.052 in (1.3 mm) | ED038186

/
Shipping calculated at checkout.
  • Free 3 Day Shipping on Orders over $99
  • Free returns
  • Secure payments
  • In stock, ready to ship
  • Inventory on the way

UltraCore® HD-12C

Flux-Cored Gas-Shielded (FCAW-G) | ED038186

0.052 in (1.3 mm)

CLASSIFICATIONS:
E71T-12C-JH8
E71T1-C1A4-CS2-H8

UltraCore® HD-12C is a mild steel, gas-shielded flux-cored wire designed to provide the high deposition rates and low temperature impact toughness required in a variety of applications.

DETAILS

UltraCore® HD-12C from Lincoln Electric is a mild steel, gas-shielded flux-cored wire designed to provide the high deposition rates and low temperature impact toughness required in a variety of applications. This is intended for use with 100% CO2 shielding gas. This product is manufactured with steel made and melted in the U.S.A. It complies to Buy America (BA), Buy American (BAA), Build America, Buy America (BABA), and American Iron & Steel (AIS) standards.

Features

  • This product is manufactured with steel made and melted in the U.S.A. It complies to Buy America (BA), Buy American (BAA), Build America, Buy America (BABA), and American Iron & Steel (AIS) standards.
  • High Deposition Rates – increase weld deposition up to 14 lbs/hr out-of-position
  • Flat Bead Appearance – fast freezing slag for a flat bead shape and increased productivity in all positions
  • Wide Operating Range – operators can set the machine on a single setting and weld in all positions
  • Little or No Pre-Weld Clean up Required – weld over light rust, mill scale and primer
  • Low Temperature Impact Toughness – capable of exceeding 27 J (20 ft·lbf) at -40°C (-40°F)

CONFORMANCE

CONFORMANCES
AWS
AWS
ABS
CWB
DNV-GL
LR
SPECIFICATION CLASSIFICATION
AWS A5.20 E71T-12C-JH8, E71T-1C-JH8, E71T-9C-JH8
AWS A5.36 E71T1-C1A4-CS2-H8
ABS - Part 2 3YSA H10
CSA W48 E491T1-C1A4-CS2-H8 (E491T-9J-H8)
DNV - 2.9 III YMS H10
LR - Chapter 11 3YS H10

MECHANICAL PROPERTIES

Classification
E71T-12C-JH8 Requirement
E71T-1C-JH8 Requirement
E71T-9C-JH8 Requirement
E71T1-C1A4-CS2-H8 Requirement
Typical Result, As-welded
Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F)
100% CO2 DC+ 400 (58) min. 480-620 (70-90) 22 min. 27 (20) min.
100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
100% CO2 DC+ 500 (73) 560-620 (81-90) 25 27-132 (20-97)

DEPOSIT COMPOSITION

Classification
E71T-12C-JH8 Requirement
E71T-1C-JH8 Requirement
E71T-9C-JH8 Requirement
E71T1-C1A4-CS2-H8 Requirement
Typical Result
Shielding Gas Polarity %B %C %Mn %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
100% CO2 DC+ 0.12 max. 1.60 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
100% CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
100% CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
100% CO2 DC+ 0.12 max. 1.60 max. 0.030 max. 0.030 max. 0.90 max. 8 max.
100% CO2 DC+ 0.0030-0.0050 0.04-0.06 1.19-1.43 0.01-0.02 0.006-0.01 0.27-0.37 4-7

TYPICAL OPERATING PROCEDURES

Diameter
0.045 in (1.1 mm)
0.045 in (1.1 mm)
0.045 in (1.1 mm)
0.045 in (1.1 mm)
0.045 in (1.1 mm)
0.045 in (1.1 mm)
0.045 in (1.1 mm)
0.045 in (1.1 mm)
0.045 in (1.1 mm)
0.052 in (1.3 mm)
0.052 in (1.3 mm)
0.052 in (1.3 mm)
0.052 in (1.3 mm)
0.052 in (1.3 mm)
0.052 in (1.3 mm)
0.052 in (1.3 mm)
0.052 in (1.3 mm)
0.052 in (1.3 mm)
1/16 in (1.6 mm)
1/16 in (1.6 mm)
1/16 in (1.6 mm)
1/16 in (1.6 mm)
1/16 in (1.6 mm)
1/16 in (1.6 mm)
1/16 in (1.6 mm)
1/16 in (1.6 mm)
1/16 in (1.6 mm)
Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
100% CO2 DC+ 25 (1) 4.4 (175) 24-29 115 1.8 (3.9) 1.5 (3.4) 85-88
100% CO2 DC+ 25 (1) 6.4 (250) 25-30 140 2.5 (5.6) 2.2 (4.8) 85-88
100% CO2 DC+ 25 (1) 7.6 (300) 26-31 155 3.1 (6.8) 2.6 (5.8) 85-88
100% CO2 DC+ 25 (1) 8.9 (350) 26-31 170 3.6 (7.9) 3.1 (6.8) 85-88
100% CO2 DC+ 25 (1) 10.2 (400) 26-31 185 4.1 (9.0) 3.5 (7.8) 85-88
100% CO2 DC+ 25 (1) 11.4 (450) 27-32 200 4.6 (10.1) 4.0 (8.8) 85-88
100% CO2 DC+ 25 (1) 12.7 (500) 27-32 215 5.1 (11.3) 4.4 (9.8) 85-88
100% CO2 DC+ 25 (1) 14.0 (550) 28-33 230 5.6 (12.4) 4.9 (10.8) 85-88
100% CO2 DC+ 25 (1) 15.2 (600) 28-33 245 6.1 (13.5) 5.3 (11.7) 85-88
100% CO2 DC+ 25 (1) 3.8 (150) 24-29 140 2.1 (4.7) 1.7 (3.8) 85-88
100% CO2 DC+ 25 (1) 5.1 (200) 25-30 160 2.9 (6.3) 2.4 (5.2) 85-88
100% CO2 DC+ 25 (1) 6.4 (250) 26-31 180 3.5 (7.8) 3.0 (6.5) 85-88
100% CO2 DC+ 25 (1) 7.6 (300) 26-31 205 4.3 (9.4) 3.6 (7.9) 85-88
100% CO2 DC+ 25 (1) 8.9 (350) 27-32 225 5.0 (11.0) 4.2 (9.2) 85-88
100% CO2 DC+ 25 (1) 9.5 (375) 27-32 235 5.3 (11.7) 4.5 (9.9) 85-88
100% CO2 DC+ 25 (1) 10.8 (425) 27-32 255 6.0 (13.3) 5.1 (11.0) 85-88
100% CO2 DC+ 25 (1) 12.1 (475) 28-33 275 6.8 (14.9) 5.7 (12.6) 85-88
100% CO2 DC+ 25 (1) 12.7 (500) 28-33 290 7.1 (15.6) 6.0 (13.3) 85-88
100% CO2 DC+ 25 (1) 3.8 (150) 23-28 200 2.9 (6.4) 2.4 (5.3) 85-88
100% CO2 DC+ 25 (1) 4.4 (175) 24-29 215 3.4 (7.5) 2.9 (6.3) 85-88
100% CO2 DC+ 25 (1) 5.1 (200) 24-29 230 3.9 (8.5) 3.3 (7.2) 85-88
100% CO2 DC+ 25 (1) 5.7 (225) 24-29 245 4.4 (9.6) 3.7 (8.1) 85-88
100% CO2 DC+ 25 (1) 6.4 (250) 25-30 255 4.8 (10.6) 4.1 (9.1) 85-88
100% CO2 DC+ 25 (1) 7.6 (300) 25-30 285 5.8 (12.7) 4.9 (10.9) 85-88
100% CO2 DC+ 25 (1) 8.3 (325) 26-31 300 6.3 (13.8) 5.4 (11.9) 85-88
100% CO2 DC+ 25 (1) 8.9 (350) 26-31 310 6.7 (14.8) 5.8 (12.8) 85-88
100% CO2 DC+ 25 (1) 10.2 (400) 27-32 340 7.7 (16.9) 6.7 (14.7) 85-88

NOTES

Note
⁽¹⁾ To estimate ESO subtract 1/4 in. (6.0 mm) from CTWD

All orders are processed within 2-3 business days (excluding weekends and holidays) after receiving your order confirmation email. You will receive another notification when your order has shipped.

For calculated shipping rates: Shipping charges for your order will be calculated and displayed at checkout.

Free shipping on orders over $99

How do I check the status of my order?

When your order has shipped, you will receive an email notification from us which will include a tracking number you can use to check its status. Please allow 48 hours for the tracking information to become available. 

If you haven’t received your order within 7 days of receiving your shipping confirmation email, please contact us at customer.service@arcsolinc.com with your name and order number, and we will look into it for you.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

More from Welding
Lincoln Electric Premium 7 Series Stick/MIG Elkskin Welding Gloves K4787
Lincoln Electric 120V Power Input Cord for Power Mig 210 9SS15599-12
Miller Valve, 34VDC 1WAY .750-14 THD 2MM ORF 100PSI 228035
Lincoln Electric Flame Retardant Cotton Welding Sleeves -21" K4827-ALL
Lincoln Electric Extended Helmet Cover w/Press Fit Silicone Seal KP4789-1
Tweco WS24A-62 Weldskill Nozzle 2/pk 12401556
Recently viewed
Back to Welding